KUKBD ET613 - RJ45 Analog Digital PoE

Specification: Item Type: Network Cable Tester Model: ET613 Material: ABS Receiver Battery: 1 x 6F22 9V battery(not included) Transmitter Battery: 3 x AA 1.5V battery(not included) Uses: Network cable hunting and testing Working Temperature: 0℃~40℃ Storage: -10℃~50℃ Relative Humidity: Main function Analog cable trace √ Digitizing cable trace √ PoE enabled trace cable √ Identify quality of wire pairs and wire connections √ Battery voltage polarity check √ Battery voltage measurement √ PoE voltage polarity check √ PoE voltage measurement √ Split pair √ Breakpoint check √ Vibration indication √ Continuity test √ Tracking signal transmission distance 3Km Output signal level ~15Vp-p Flashlight √ Adjustable loudness √ Low battery indicator (transmitter) √ Auto power off (transmitter) Shuts down after about 20 minutes of inactivity Automatic shutdown (receiver) √ How to Use: 1. The operation method of the host is not different. The operation method of the digital line is different from that of the analog line . Press and hold the SCAN button for 2 seconds to turn on the line . Simulate the line hunt function, long press for 2 seconds to shut down, no operation for 10 minutes, it will shut down automatically. 2. After the clicks SCAN and selects the function, there is no need to press the button during the hunt operation; press SCAN on the host to enter the hunt function, press Hz to switch to the digital hunt frequency L2 mode, and the digital hunt cannot switch to hunt. Line frequency. 3. In order to quickly find the target line, you can first adjust the direction knob of the finder to the maximum sensitivity. After finding the vicinity of the target line, adjust the appropriate sensitivity to accurately locate the target line; at this time, you can connect the target line to the RJ45 port of the finder.