Jectse Auto Bidirectional Car Voltage Tester

1. Intelligent Detection: This multifunctional test pen easily handles various circuit detection issues, such as car battery voltage testing, car wiring conductor testing, 3 phase power phase sequence detection, mains voltage testing, and electrical maintenance 2. NCV Inductive Electricity Detection: The automatic voltage tester supports NCV detection. Without contacting the instrument, it can determine if there is electricity by simply getting close, and can also locate break points along the circuit 3. Neutral Live Wire Identification: There is no response when the pen tip touches the neutral wire, while there are sound and light alert prompts when it touches the live wire, clear and intuitive 4. DC Voltage and Resistive Value: It can measure and display DC voltage and resistive value. The maximum allowable voltage on the measurement terminal is 600V DC (rms). A red light will illuminate when the DC voltage exceeds 30V, and the tester will emit a warning sound if the resistive value is less than 50Ω 5. Continuity Testing: When the continuity test is normal, a green light will illuminate and a buzzer will sound. The test is simple, convenient, and fast, making it suitable for various scenarios 6. Auto Power Off and Low Battery Alert: The tester will automatically power off after 15 minutes of inactivity to save power. When the battery level is low, a sign will be displayed on the LCD Spec: Item Type: Car Voltage Tester Product Material: ABS Power Supply: 2 x AAA Battery (not included) Multimeter Full Range: Counts Display: Digit LCD Display HOLD: Data Hold Function Battery Low Voltage Display: Support Automatic Shutdown: Support Continuity Measurement: If the resistive value of the measured line is less than 500, the buzzer will sound. Conduction backlight is red DC Voltage Range Resolution Accuracy 4V 0.001V ± (0.8% reading+2 words) 40V 0.01V 400V 0.1V 600V 1V ± (1.0% reading+2 words) Input Impedance: 10MΩMaximum Input Voltage: 600V DC (Valid value) AC Voltage (40Hz-1KHz) Range Resolution Accuracy 4V 0.001V ± (1.0% reading+3 words) 40V 0.01V 400V 0.1V 600V 1V ± (1.2% reading+3 words) Input Impedance: 10MΩResponse: True Valid ValueMaximum Input Voltage: 600V AC (Valid Value) Resistive Value Range Resolution Accuracy 4KΩ 0.001KΩ ±(1.2% reading+3 words) 40 KΩ 0.01KΩ 400KΩ 0.01KΩ 4MΩ 0.001MΩ ±(1.2% reading+5 words) 40MΩ 0.01MΩ How to Use: Take out the product and follow the user manual. PackageList: 1 x Car Voltage Tester 1 x Test Probe 1 x Test Clamp 1 x 1 x User Manual