Fafeicy Brushless Li Ion Drill - 1300mAh

Specification: Item Type: Brushless Li Ion Drill Battery: 5 cell 1300mAh li ion battery Torsion: 55N.m Motor: Brushless, 2 speed Level Adjustment: 25+1 Material: Engineering plastic How to Use: 1. Switch Control There are three positions on the switch control. Before operating, make sure the motor is completely stopped and the start stop switch is not pressed: Forward (CW): Move the direction switch to the corresponding forward position. Reverse (CCW): Move the direction switch to the corresponding reverse position. Actuator Lock: Push the control switch to the middle position, the actuator cannot be used at this time. 2. Start/Stop and Speed Adjustment Start: Pull the actuator, the LED light will turn on, the tool can run between 0 to full speed. Speed Adjustment: Control the speed by adjusting the force applied to the actuator. The harder you pull, the more fast the speed. Stop: Release the actuator, the electric brake will immediately stop the tool from running. 3. Screwing Operating Align the bit with the screw head and apply pressure to the tool. Slowly start the tool and gradually increase the speed. When the clutch actuators, release the actuator immediately to stop the operating. Before screwing into wood, it is recommended to refer to the Wood Screw Specifications and Corresponding Pre Drilling Hole Diameters Table for pre small holes to facilitate operating and prevent workpiece cracking. Refer to the user manual for specific corresponding relationships. packing list: 1 x 2 in 1 Multi Function Electric Drill Host 1 x Matching Rechargeable Battery 1 x Supply Adapter 1 x User Manual Note: Do not press the tool excessively, as it may damage the tip of the drill bit, reduce tool performance, and shorten its lifespan. After the battery is depleted, allow the tool to rest for 15 minutes before installing an replacement battery for use.