EMUKOEP Clamp Leak Tester - 60.0A 7mm

Specification: Item Type: Leak Tester Material: ABS Models: Measurement Function: AC and DC leak , measuring Operating Power Supply: 6F22 9Vx1(Not Included) Test Method: Clamp CT, non-contact measurement Jaw Size: Φ7mm Range: 0mA~60.0A AC/DC Resolution: 1mA AC/DC Accuracy: ±2%rdg±5dgt (under 23°±5°C, 75% relative humidity) Display Mode: 4 digits LCD display Sampling Rate: 2 times per sec Frequency Response: AC 45Hz~400Hz Polarity Indicator: Auto recognition when DC is detected, displays the "-" sign. Wire Position: The wire to be detected is in the center of the jaws Shift: Fully automatic switching Line Voltage: 600V and underline test USB Interface: Data stored by the USB interface can be loaded, saved and printed on the computer. Communication Parameters: Baud speed 9600, data bit 8, stop bit 1, NO accompanying bit Support Functions: Data storage, overflow display, automatic shutdown, battery voltage. Working :10mA Operating Temperature and Humidity: -10°C~50°C; below 80% relative humidity Limit Temperature Error: -10°C~0°C and 40°C~50°C, the maximum error increases by 2% Storage Temperature and Humidity: -10°C~60°C; below 70% relative humidity Insulation power: AC 3700V/rms (between core and box) How to Use: Take the product, open the back cover with a tool, install the battery, you can adjust the user measuring range, and then use the measurement. Right button is used for zero setting which provides enhanced anti-interference and better calibration to zero. HOLD is data retention switch. It is very convenient to measure by simply inserting the wire on the jaws. packing list: 1 x AC/DC Leakage Meter (Battery Not Included) 1 x CD 1 x USB Data Cable 1 x Manual 1 x Bag