Cryfokt Servo Motor Gear - DC motor

1. Inner Runner: The diameter of the inner runner of the cable retractor is 25mm and the circumference is about 7.8cm. 2. Metal Gear: This is a cable take up machine with high accuracy metal gears. 3. No Burden: The rewinding machine is small in size and light in weight, which will not burden the ship. 4. : This is a cable take up machine with a DC motor. 5. Application: This cable retractor is suitable for classes that are the same as or smaller than the IOM. Spec: Item Type: Servo Motor Gear Material: Alloy Colour: Black Servo Size: Approx. 40.5 x 20.2 x 38mm /1.6 x 0.8 x 1.5in(Without Cable) Working Voltage: 4.8-6.0V Working Speed: 0.90sec/360°(4.8V), 0.90sec/360°(6V) Torsion: 9.24kg/cm (4.8V), 10.63kg/cm (6V) Applicable: RC Ship Rope Machine How to Use: 1. Install the steering gear to the steering gear base first, without installing the steering gear arm or steering gear protection. Only fix the steering gear. Then connect the steering gear to the , which is usually divided into 3 wires from the CH1 or for ST socket. Bottom line, VCC, signal PWN. 2. After the steering gear is fixed, turn on the remote control and turn on the ESC after setting, and then the steering gear will stop at a fixed position. 3. Without turning off the remote control and the steering gear, install the steering gear protection or the steering gear arm to the steering gear output gear. packing list: 1 x Capstan 1 x Winding Wheel 9 x Screw 4 x Screw Anti Skid Socket 4 x Rubber Pad