Auto Wayfeng Car Rearview Camera - 728 x 512 pixels

All the cameras will be checked before sending to you Setting method: Image sensor: 1/4 "Sony color CCD. TV: NTSC & friend Illumination. <0.1 AGC: Auto BLC: cars White Balance: Auto Video: bright colors 728x512 effective pixels. Resolution: 480TV lines Video output: 1.0vp-p, 75 Electronic shutters: 1/60 (NTSC) - 1 / 10.000, 1/50 (PAL) - 1 / 10.000 S / N: better than 48db Lens Angle: 170 degrees From the class: IP 68 Operation temperature: from - 20 ¡ã C + 80 ¡ã C RH95% Storage temperature: - 30 ¡ã C + 80 ¡ã C Labor (dcv): 12 Current consumption: 90ma max About the TV system of the machine, rear view camera: Usually monitors support both NTSC and pal TV sistem.i no matter what camera - PAL or NTSC system. However, if you are not sure, please make sure that your monitor supports NTSC or PAL sistemy.esli your monitor only can support NTSC or friend, please leave a message that the TV you one business day after you make the payment. Or we will send the NTSC or pAL system camera at random. How to Install: Fix the camera to a special design hole in your car. Connect the built-in license plate light of the camera, where the stock license plate light was connected to get the power Connect the power to the camera car reverse lights - red wire to positive and negative black wire. Video cable to connect the camera to the extension cord. Connect an extension cord to the machine monitor. You will see the images when your car is on the reverse transition. => Your stock license plate light at the car => Set the camera where the stock license plate light. => You will see the images when your car is on the reverse transition.