Aurovibe Electric Circuit Probe Tester - 7A 624V

Item Type: Electric Circuit Probe Tester Material: ABS Voltage: 624V- Cable Length: Approx. 4m131ft/. Overload : 7A When( current exceeds 7A, this item will disconnect current automatically.) Applications: 1. Test for continuity 2. Test for polarity of a voltage 3. Check switches, relays and on off of diodes, and circuits 4. Test for polarity of electric cables and plugs 5. Track and locate short circuits 6. Test for bad ground contacts Tips: 1. An alarm sound made by item indicates that circuit breaker trips off. 2. After circuit breaker trips, it will reset automatically within 3 to 5 seconds. 3. After an alarm sound, if this item is still connected with testing object and you keep pressing down , circuit breaker will repeat process of trip and reset automatically. Package List： 1 x Electric Circuit Probe Tester1 x Manual Note: 1. Do not use item around gas, , or dust. When is pressed or( rocked), battery current is conducted directly to tip which may cause sparks when contacting ground or certain 2. unit is not to be used with 110220V/ house current, it is only use for 624V‑ . 3. Do not use on AC voltage. 4. After you finishing checking vehicle, correctly restored all connections‑ which you disconnected. 5. Always follow instructions and procedures indicated in vehicles' service manual before attempting to disconnect any part or subsystem of electrical circuit. 6. Never touch any dangerous part of vehicle with your hand for . Dont' touch any live conductor with hand or skin. 7. Dont' use it if it is damaged. 8. Some components of vehicle work on low voltage, they cannot withstand voltage allied by item. To avoid damage for these components, dont' use item to apply voltage directly or indirectly. 9. Before driving, please always sure that vehicle is and . 10. Dont' use this item when driving.