High Pressure Steam cleaner
Make Your Home Shine Again
·2500W High Power
·105℃/221℉ High-Temperature Steam
·3BAR High-pressure Steam
·3-Grade Steam Spray Adjustment
·10 Seconds Rapid Heating
Structure display
·Hand-held remote control spray guns (with button and requires battery installation)
·Power Switch
·5Ft/1.5m Steam Hose
·1600ML Water Tank
The power switch of the cleaning machine is located on the handheld spray gun (waterproof) and can be operated from a long distance.
ADJUSTABLE STEAM
Handheld remote control, easy to operate and improve work efficiency
Attention:Do not touch the copper nozzle with your hands when using it to avoid burns
The temperature and pressure of the steam are highest at the nozzle, the farther away from the nozzle, the lower the temperature and pressure This is because the heat is lost quickly when the steam comes into contact with the air, please keep the steam gun close to the item you want to clean.
Deeply cleaning out
Grime, Dirty,Grease,Stains
·Copper Brush:For metal surface and heawy oil
·Nylon Brush:For delicate surface and ordinary dirt
·Round Brush:For wide surface items
·High Temperature Nozzle：Curved design, used for cleaning gaps.
·Scraper：Used for scraping off hard-to-remove stains, stickers, glue, etc.
·lroning Brush：Used for taking care of cloth and leather items.
·Window Scrape：Used for cleaning glass, tiles and windows.
Multile Uses
Suitable for a variety of scenarios, replace the required brushes
Kitchen, toilet, range hood, gas stove, glass window, gas stove, washing machine, air conditioner, toy.
Detail display
·LIGHTWEIGHT TO CARRY:Portable handle and lightweight size make the steamer easy to carry only by one hand.
·1.6L WATER TANK:Which can work for up to 1.5 hour, and supports adding water during work.
·Switch:At the end of work, press and hold the trigger button to easily stop the machine from working. The button has a waterproof design and is safer.
How To Operate The Steam Cleaner?
Step1:Open the silicone plug and pour in water
Step2:Select and install the desired cleaning brush
Step3:Press and hold the power switch on the trigger and adjust to the appropriate gear (the gear can be adjusted cyclically).
Step4:Hold the handle and start the cleaning job
Step5:After cleaning, press and hold the button to turn off the switch and the machine stops working.
Step6:Drain the remaining water from the tank
It is normal that water flows out for a few seconds before spraying steam.
The power switch on the trigger can adjust the water vapor content.
When the work stops, drain the water in the tank and pipes, wipe the water off the machine with a dry cloth.
You Will Get:You can get:1 x steam cleaner machine with tank, 1 x 1.5m steam pipe,1 x 1.5m power cord, 1 x High Temperature Nozzle, 1 x Large Nylon Brush, 1x Copper Brush, 1 x Small Nylon Brush, 1 x Small Scraper, 1 x Large Scraper, 1 x lroning Brush, 1 x Window Scrape, 1 x Extended Sprayer Rod,1x towel,1xfunnel, 1 x Glove, 2 x waterproof gasket and 1 x user manual.
Warm Prompt:
1，Every steam cleaner is tested before leaving the factory, so there will be water marks on the water inlet hose.
2，Please remember to wear matching gloves to prevent burns when using.
3，There is no control system on the handlebar. If you want to stop steaming, please turn off on the touch screen.
4，Sometimes steam pipe loose during in transport , please Turn and tighten before use.
5，Sometimes nozzle loosed or dripped after long time use, change the rubber ring please which included in the accessories.
6，Please clean the residual solution in the machine in time after each use.
7，It is a high-temperature steam cleaning machine, please don't touch the metal nozzle, don't touch the steam, don't spray at human, pets or the device itself.
8，When cleaning glass products, need to avoid bursting due to uneven heating.
9，In order to better protect and use the steam cleaning machine, please do not unscrew the steam pipe privately after receiving the machine.
