Jectse XC51C - Pen Type Non Touch AC DC Voltage Tester

1. [Multi Functional] This non touch voltage tester can measure AC and DC voltage, resistor, continuity, diode, and capacitor, covering almost all daily measurement tasks. 2. [Intelligent Design] This voltage tester has automatic target identification and range adjustment functions, simplifying the process, allowing you to obtain accurate results without manual switching. 3. [Practical Features] This pen type multimeter is lightweight and portable, with low battery reminder and auto power off function for power saving, the clear LCD scree and flashlight make it easy to use in any lighting condition. 4. [Safety Guard] This voltage tester has non touch voltage testing and live wire identification functions, which can reduce risks and improve work safety. 5. [Wide Application] This voltage tester has comprehensive functions and adopts intelligent technology, suitable for various purposes, making it suitable for homes, schools, research institutions, and factories. Spec: Item Type: Pen Type Voltage Tester Material: ABS Model: XC51C Power Supply: 2 x AAA batteries (not included) DC Voltage Range Resolution Accuracy 6V 0.001V ±(0.8% rdg+2 digits) 60V 0.01V 600V 0.1V ±(1% rdg+2 digits) Input Impedance: 10MΩ Maximum Input Voltage: 600V DC (effective value) AC Voltage (40Hz-1KHz) Range Resolution Accuracy 6V 0.001V ±(1% rdg+3 digits) 60V 0.01V 600V 0.1V ±(1.2% rdg+3 digits) Input Impedance: 10MΩ Response: True effective value Maximum Input Voltage: 600V DC (effective value) Resistor Range Resolution Accuracy 600Ω 0.1Ω ±(1.2% rdg+3 digits) 6KΩ 0.001kΩ 60KΩ 0.01kΩ 600kΩ 0.1KΩ 6MΩ 0.001MΩ 60MΩ 0.01MΩ ±(2% rdg+5 digits) Capacitor Range Resolution Accuracy 60nF 0.01nF ±(4% rdg+5 digits) 600nF 0.1nF 6uF 0.001uF 60uF 0.01uF 600uF 0.1uF 6mF 0.001mF Overload Guard: 36V DC AC (effective value) Temperature Range Resolution Accuracy 0-70℃ 1℃ ±3℃ 32-158℉ 1℉ ±3℉ Diode 0.001V Display the approximate forward voltage of the diode Reverse DC Voltage: 3.9V Frequency Range Resolution Accuracy 9.999Hz 0.001Hz ±(2% rdg+5 digits) 99.99Hz 0.01Hz .9Hz 0.1Hz 9.999kHz 0.001kHz 99.99kHz 0.01kHz .9kHz 0.1kHz 9.999MHz 0.001MHz Overload Guard: 250V DC or AC (effective value)Measurement Signal: Vpp 30mV AC signalNote: As the measurement frequency increases, the VPP input signal also increases Duty Cycle 1%-99% 0.10% ±(3% rdg+5 digits) AC DC Current Measurement Range Resolution Accuracy 0.1mA-200mA 0.1mA ±(3% rdg+10 digits) Overload Guard: 250V 200mA Continuity Test Range Accuracy If the resistor of the measured circuit is less than 500, the buzzer inside the meter will sound PackageList: 1 x Pen Type Voltage Tester 2 x Test Pens 1 x Notice: To avoid damage to the meter caused by electric shock, users should pay attention to the following safety tips. 1. Do not measure any voltage that exceeds the measuring range specified by this meter. 2. Although there is internal protective circuit in the resistor measuring gear, do not apply high voltage (over 100V) to the input terminal in the resistor measuring gear. 3. Check if the test cables are damaged or have exposed metal parts. 4. Be aware of the possibility of electric shock when measuring voltage over 30VAC or 50VDC. 5. Before measuring current, turn off the power, disconnect the circuit point being measured, and then power on for measurement. 6. Do not open the battery cover or charging while measuring or operating the functions of the meter.