Torvex Multimeter Test Leads Kit

Item Type: Multimeter Test Leads Kit Material: ABS+PVC Characteristic: 1: When measuring the components, it can be directly measured from the rear of the harness plug terminal without damaging the line, so as to reduce the damage of the insulation rubber of the line, and thus reduce the impedance increase caused by the line . 2: It is applicable to the extension line of any ammeter and oscilloscope probe to reduce the trouble of wiring when checking the line and help you to quickly detect. 3: When measuring the current, it is not necessary to cut or disconnect the wires, but the wiring of the wire group can be used to reach the serial circuit. 4: The variable can simulate the hypothetical signal of the water temperature sensor, throttle position sensor element to the computer, saving the risk of replacing parts. 5: It is equipped with two sets of LED lights, which can monitor the control signals of Hall, photoelectric signal, fuel injector, solenoid valve, automatic transmission shift solenoid wire and other actuating elements. 6: SRS replaces , which can simulate safety belt tensioner to avoid accidents and misjudgment during maintenance. 7: All kinds of wire groups in the box can be applied to all kinds of plug terminals of European, and Asian car series, with high versatility and convenient use. Detailed configuration of multimeter group: 5KΩ variable resistor x 2 LED stroboscope x 2 connector x 2 1 to 2 connectors x 2 Adapter one to one x 4 Needle probe x 4 clip x 2 Round terminal x 24 Flat terminal x 48 Probe x 2 Package List： 2 x 5KΩ Variable Resistor 2 x LED Stroboscope 2 x Connector 2 x 1 To 2 Connectors 4 x Adapter One To One 4 x Needle Probe 2x Clip 24 x Round Terminal 48 x Flat Terminal 2 x Probe 1 x Manual 1 x Portable Box